Hola foro.
Despues de muchos intentos de construir un max232 parece que quiere funcionar el el cable de nokia dku-5, lo que ocurre es que pulso la tecla "p" y
creo que no hace ni caso, os voy a poner lo que tira el putty a ver si es que lo tengo parado el arranque y no me doy cuenta. La finalidad de hacer
el downgrade es para utilizar el puerto usb como host.
Un saludo y gracias.
Despues de muchos intentos de construir un max232 parece que quiere funcionar el el cable de nokia dku-5, lo que ocurre es que pulso la tecla "p" y
creo que no hace ni caso, os voy a poner lo que tira el putty a ver si es que lo tengo parado el arranque y no me doy cuenta. La finalidad de hacer
el downgrade es para utilizar el puerto usb como host.
Código PHP:
Performing CRC on Image 1...
CRC time = 48456318
Detected LZMA compressed image... decompressing...
Target Address: 0x80004000
decompressSpace is 0x4000000
Elapsed time 934269766
Decompressed length: 15563252
Executing Image 1...
eCos - hal_diag_init
Init device '/dev/BrcmTelnetIoDriver'
Init device '/dev/ttydiag'
Init tty channel: 80edb488
Init device '/dev/tty0'
Init tty channel: 80edb4a8
Init device '/dev/haldiag'
HAL/diag SERIAL init
Init device '/dev/ser0'
BCM 33XX SERIAL init - dev: 0.2
Set output buffer - buf: 0x810957a0 len: 4096
Set input buffer - buf: 0x810967a0 len: 4096
BCM 33XX SERIAL config
LsSpiInit 3380
[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC Target) Configuring/Loading Flash driver...
[00:00:00 01/01/1970] [tStartup] BcmSpiFlashDevice::DetectFlash: (SPI Flash Device Factory) WARNING - Detected SPI flash with JEDEC ID =0x10216
[00:00:00 01/01/1970] [tStartup] FlashDeviceDriver::SpiFlashPlaceRegions: (Flash Driver C API) WARNING - Permanent NonVol would fit in the boot block
of this flash device, but I found existing NonVol in the following block; using this location instead...
[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC Target) Loading BootloaderStore driver...
[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC Target) Loading ProgramStore driver...
ProgramStoreDeviceDriver::ProgramStoreDriverInit: INFO - Initializing...
[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC Target) Loading NonVol driver...
[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC Target) Storage drivers initialized successfully.
[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitDeviceAbstractions: (BFC Target) Creating singletons for ProgramStore/BootloaderStore/NonVol devices...
Detecting the next image number that we will store to by default...
Bootloader indicates we are running image 1
By default, we will dload to image number 2!
[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitDeviceAbstractions: (BFC Target) Device abstraction singletons created successfully.
Init US V2 Table 0
Init US V2 Table 1
Init US V2 Table 2
Init US V2 Table 3
BcmCapNonVolSettings::GetSingletonInstance: WARNING - the singleton instance is NULL, and someone is accessing it!
Reading Permanent settings from non-vol...
Checksum for permanent settings: 0xb65e8d53
Settings were read and verified.
Reading Dynamic settings from non-vol...
Checksum for dynamic settings: 0x933d9907
Initialized 3.0 enabled features DYN to 0x82240
Read 3.0 enabled features DYN to 0x100240
[00:00:00 01/01/1970] [tStartup] CwmpClientNonVolSettings::ReadFromImpl: Read 0 domain entries
we found one in the table already!!!!
Settings were read and verified.
[00:00:00 01/01/1970] [tStartup] BcmEpsCmDocsisSystem::Initialize: (BFC System) ERROR - Disable console port now!